• Power supply and communication by USB port directly;
• 3D PTZ control and 2 joystick control buttons;
• Up to 15 programmable buttons are available;
• Support digital tube to display the input content;
• Support indicators to show the operation status of keyboard;
• Compatible with a various kinds of client software and platform software;
• Support USB HID protocol.

• Transmits analog/IP signals over coaxial cable
• 1*10/100Mbps RJ45 input (support 802.3af PoE), 1*BNC input, 1*BNC output, used on IPC side
• Industrial design, high reliability;

• 128 x 64 screen
• 4-axis joystick
• Connectable to the Multi-functional Video Center (MVC) and Matrix Access Gateway (VAG) by RS-422 serial port, and shortcut operation of camera/camera groups switch on video wall
• Connectable to DVR by RS-485 serial port, and operation of front panel buttons
• Connectable to dome by RS-485 serial port and realize PTZ control and picture capture by joystick operation
• 16 user accounts management: 1 admin

Adapter load capacity is more than 10kg

• 7-inch TFT touch screen at 800×480 resolution
• Speed dome, video decoder & DVR control
• 1-ch HD video stream decoding at 1080p
• Support 15 users, and each can operate up to 256 devices
• USB 2.0 interface for video backup 

• Wall-mounted Bracket for 19"/22"/32"/40" Monitor(Suitable model shown in the end)
• Solid Steel structure, Prevent screen bend or twist
• Cold-rolled Steel Plate(SPCC)

• Transmits TVI signal via UTP cable
• No need to provide power. Plug and play, easy to maintain
• Installed directly with camera video output
• Spring compression wire terminals, for construction convenience
• Transmission distance of color signal (via CAT 5 or CAT 6): up to 200 meters

Commercial Grade Tripod for the portable setup of Hikvision thermal cameras
UNC 1/4 inch-20 tripod interface

Use with:

• Hikvision Thermal Turret Cameras (*DS-2908ZJ Turret Adapter Plate required)
• Hikvision Thermal Bullet Cameras (*DS-2909ZJ Bullet Adapter Plate required)
• Hikvision Fever Screening Handheld Device

• H.264/MPEG4/MPEG2/MJPEG encoding standards supported
• Up to WD1 real-time encoding
• One PoE network interface for DS-6701/6704HWI models

• 8 port Network optical fiber transmitter,
• Sever 100M electrical interface,
• one 1000M electrical interface,o
• ne 1000M optical interface,20 kilometers

• H.264/MPEG-4/MPEG-2/MJPEG Compression
• WD1/960H 960 x 480 at up to 30 fps
• 1 Channel; Dual Stream Encoding
• RS-485 Port for PTZ Control

• Aluminum alloy material with surface spray treatment
• The bracket has built-in outlet hole
• Camera soleplate has sponge mat
• Camera soleplate is rotatable

Wall mount bracket for PTZ camera.

White in color.

• General design for indoor/outdoor 
• Design of cable entrance hole
• Better water proof with rubber pad design 

• Solid steel structure, preventing screen bending or twisting
• Cold-rolled steel plate (SPCC)
• Quick and easy installation

• Aluminum alloy material with surface spray treatment
• Exquisite and small design
• Design of safety rope for more convenient installation

• Metal aluminium alloy construction
• White
• 97x182x305mm
• Long arm
• Weight 1070g

• Die casting aluminum with surface spray treatment
• Design with cable entry hole
   

• Transmits analog/IP signals over coaxial cable
• 1*BNC input, 1*10/100Mbps RJ45 output, 1*BNC output, used on NVR side
• Industrial design, high reliability;

 19 inch width, 4U height
 Dual power supply design, each 220V AC
 17 usable receiver chassis
 Backboard support VMS signal transmission
 Aluminum structure

• Solid steel structure, preventing screen bending or twisting
• Cold-rolled steel plate (SPCC)
• Quick and easy installation

• Outdoor 5GHz wireless bridge CPE, 
• Max.distance 15km, 2×2 MIMO antenna with 300Mbps thoughput, 
• 15dBi gain, 
• output power 27dBm, 802.11a/n, Angle H: 40° V: 15°, 
• IP65,  
• 1 10/100M RJ45, 
• 1 10/100M RJ45 with passive PoE input

• 1 port Network optical fiber transmitter,
• one 100M electrical interface,
• one 100M optical interface,
• 20 kilometers

• Indoor Pendant Mounting bracket for bullet cameras
• Material: Aluminium alloy
• Dimensions: 70.4 x 84 x 200mm